Axial angular contact ball bearings, for screw mounting

• The complete units are consisted of a single-piece outer ring, a two-piece inner ring, balls, cage assemblies and seals.

• Bearings are double direction angular contact ball bearings with a 60° contact angle in an O arrangement.

• can support axial loads from both directions as well as radial loads.

• are preloaded after assembly by a precision locknut.

• are protected from contamination by lip seals or gap seals.

• are greased with a lithium complex soap base grease to SHELL Alvania RL3.

• can be relubricated.

• are suitable for operating temperatures from -30°C to +120°C (limited by the grease, sealing ring material and the plastic ball cages).

• are precision bearings e.g. for use with screw drives.

• outer ring is suitable for flange mounting.

• lip seals or gap seals on both sides.

*Suffix PE: increased tolerances.

Bearing No. Dimensions (mm) Load Ratings Limiting Speed KBB d D B b d1 d2 D1 I J r1 min r min t Weight(KG) Ca (KN) Coa (KN) Cua (KN) nG rpm ZKLF 1255.2RS 12 55 25 3 25 6.5 33.5 17 42 0.6 0.3 120 0.37 17 24.7 0.91 3800 ZKLF 1560.2RS 15 60 25 3 28 6.5 36 17 46 0.6 0.3 120 0.43 17.9 28 1.04 3500 ZKLF 1762.2RS 17 62 25 3 30 6.5 38 17 48 0.6 0.3 120 0.45 18.8 31 1.15 3300 ZKLF 2068.2RS 20 68 28 3 34.5 6.5 44 19 53 0.6 0.3 90 0.61 26 47 1.74 3000 ZKLF 2575.2RS 25 75 28 3 40.5 6.5 49 19 58 0.6 0.3 90 0.72 27.5 55 2.04 2600 ZKLF 3080.2RS 30 80 28 3 45.5 6.5 54 19 63 0.6 0.3 60 0.78 29 64 2.37 2200 ZKLF 3590.2RS 35 90 34 3 52 8.5 63 25 75 0.6 0.3 90 1.13 41 89 3.3 2000 ZKLF 40100.2RS 40 100 34 3 58 8.5 68 25 80 0.6 0.3 90 1.46 43 101 3.75 1800 ZKLF 50115.2RS 50 115 34 3 72 8.5 82 25 94 0.6 0.3 60 1.86 46.5 126 4.65 1500 ZKLF 1255.2Z 12 55 25 3 25 6.5 33.5 17 42 0.6 0.3 120 0.37 17 24.7 0.91 7600 ZKLF 1560.2Z 15 60 25 3 28 6.5 36 17 46 0.6 0.3 120 0.43 17.9 28 1.04 7000 ZKLF 1762.2Z 17 62 25 3 30 6.5 38 17 48 0.6 0.3 120 0.45 18.8 31 1.15 6600 ZKLF 2068.2Z 20 68 28 3 34.5 6.5 44 19 53 0.6 0.3 90 0.61 26 47 1.74 5400 ZKLF 2575.2Z 25 75 28 3 40.5 6.5 49 19 58 0.6 0.3 90 0.72 27.5 55 2.04 4700 ZKLF 3080.2Z 30 80 28 3 45.5 6.5 54 19 63 0.6 0.3 60 0.78 29 64 2.37 4300 ZKLF 3590.2Z 35 90 34 3 52 8.5 63 25 75 0.6 0.3 90 1.13 41 89 3.3 3800 ZKLF 40100.2Z 40 100 34 3 58 8.5 68 25 80 0.6 0.3 90 1.46 43 101 3.75 3300 ZKLF 50115.2Z 50 115 34 3 72 8.5 82 25 94 0.6 0.3 60 1.86 46.5 126 4.65 3000 ZKLF 1255.2RS PE 12 55 25 3 25 6.8 33.5 17 42 0.6 0.3 120 0.37 17 24.7 0.91 3800 ZKLF 1560.2RS PE 15 60 25 3 28 6.8 36 17 46 0.6 0.3 120 0.43 17.9 28 1.04 3500 ZKLF 1762.2RS PE 17 62 25 3 30 6.8 38 17 48 0.6 0.3 120 0.45 18.8 31 1.15 3300 ZKLF 2068.2RS PE 20 68 28 3 34.5 6.8 44 19 53 0.6 0.3 90 0.61 26 47 1.74 3000 ZKLF 2575.2RS PE 25 75 28 3 40.5 6.8 49 19 58 0.6 0.3 90 0.72 27.5 55 2.04 2600 ZKLF 3080.2RS PE 30 80 28 3 45.5 6.8 54 19 63 0.6 0.3 60 0.78 29 64 2.37 2200 ZKLF 3590.2RS PE 35 90 34 3 52 8.8 63 25 75 0.6 0.3 90 1.13 41 89 3.3 2000 ZKLF 40100.2RS PE 40 100 34 3 58 8.8 68 25 80 0.6 0.3 90 1.46 43 101 3.75 1800 ZKLF 50115.2RS PE 50 115 34 3 72 8.8 82 25 94 0.6 0.3 60 1.86 46.5 126 4.65 1500